Hurley, PK,O'Connor, E,Djara, V,Monaghan, S,Povey, IM,Long, RD,Sheehan, B,Lin, J,McIntyre, PC,Brennan, B,Wallace, RM,Pemble, ME,Cherkaoui, K

2013

December

IEEE Transactions on Device and Materials Reliability

The Characterization and Passivation of Fixed Oxide Charges and Interface States in the Al2O3/InGaAs MOS System

Validated

()

High-k InGaAs fixed oxide charges interface state density C-V analysis characterization passivation CAPACITANCE-VOLTAGE CHARACTERIZATION ATOMIC LAYER DEPOSITION P-B CENTERS ELECTRICAL-PROPERTIES ENERGY-DISTRIBUTION SI/SIO2 INTERFACE ALD AL2O3 DEFECTS GAAS DIELECTRICS

13

429

443

In this paper, we present a review of experimental results examining charged defect components in the Al2O3/In0.53Ga0.47 As metal-oxide-semiconductor (MOS) system. For the analysis of fixed oxide charge and interface state density, an approach is described where the flatband voltage for n- and p-type Al2O3/In0.53Ga0.47 As MOS structures is used to separate and quantify the contributions of fixed oxide charge and interface state density. Based on an Al2O3 thickness series (10-20 nm) for the n- and p-type In0.53Ga0.47 As layers, the analysis reveals a positive fixed charge density (similar to 9 x 10(18) cm(-3)) distributed throughout the Al2O3 and a negative sheet charge density (-8 x 10(12) cm(-2)) located near the Al2O3/In0.53Ga0.47 As interface. The interface state density integrated across the energy gap is similar to 1 x 10(13) cm(-2) and is a donor-type (+/0) defect. The density of the fixed oxide charge components is significantly reduced by forming gas (5% H-2/95%N-2 ambient at 350 degrees C for 30 minutes) annealing. The interface state distribution obtained from multi-frequency capacitance-voltage and conductance-voltage measurements on either MOS structures or MOSFETs indicates a peak density located around the In0.53Ga0.47 As midgap energy, with a sharp increase in the interface state density toward the valance band and evidence of interface states aligned with the In0.53Ga0.47 As conduction band. The integrated interface state density obtained from multi-frequency capacitance-voltage and conductance-voltage analysis is in good agreement with the approach of comparing the flatband voltages in n- and p-type Al2O3/In0.53Ga0.47 As MOS structures. Finally, this paper reviews recent work based on an optimization of the In0.53Ga0.47 As surface preparation using (NH4)(2)S, combined with minimizing the transfer time to the atomic layer deposition reactor for Al2O3, which indicates interface state reduction (< 10(12) cm(-2)eV(-1)) and genuine surface inversion for both n- and p-type Al2O3/In0.53Ga0.47 As MOS structures.

10.1109/TDMR.2013.2282216